Laboratorio

Testing LED with different resistances

In the experiment the LED is given a supply of 2V, there are three conditions A, B and C which has no resistance connected, a 11Ω resistance and 22Ω…

Vista previa de Testing LED with different resistances
Abrir en el laboratorio Insertar La simulación se ejecuta en modo demo y se pausa a los dos minutos; ábrela en el laboratorio para continuar.

¿Enseñas con circuitos?

Crea un grupo, deja un circuito a tus alumnos y revisa lo que entregan.

Ver planes para maestros

Cómo funciona

In the experiment the LED is given a supply of 2V, there are three conditions A, B and C which has no resistance connected, a 11Ω resistance and 22Ω resistance is connected in eries respectively.

Here, the use of resistance is to prevent the LED from the high current.

Also check out the updates on LEDs

Qué contiene

  • 3× batería
  • 2× resistencia (7.03 Ω, 21.9 Ω)
  • 3× LED
  • Medido con multímetro

Etiquetas

LED Battery Resistor Multimeter

Acerca de

Por Farhan Sheikh
Guardado el April 18, 2018 · actualizado el January 15, 2026
5,417 visitas
Página: dcaclab.com/circuits/11996-testing-led-with-different-resistances

Inserta este circuito

<iframe src="https://dcaclab.com/experiments/11996-testing-led-with-different-resistances/iframe" width="560" height="410" frameborder="0"></iframe>

Cita: Sheikh, F. (2018). Testing LED with different resistances. DCACLab. https://dcaclab.com/circuits/11996-testing-led-with-different-resistances

Circuitos relacionados