Lab

Circuit Challenge: Protect the LED

A 9 V battery, a switch, a 47 Ω resistor, a red LED rated for 20 mA and an ammeter. Choose a resistor that keeps the LED under 20 mA before you close the…

Preview of Circuit Challenge: Protect the LED
Open in the lab Embed Run the circuit right here. To edit it in the full lab, sign in; free accounts have a time limit there.

Electric circuit games

Teaching with circuits?

Create a classroom, give your students a circuit to build, and review what they submit. Try it free with one classroom and up to 5 students.

Try the free classroom demo

How it works

The red LED is rated for 20 mA. With the 47 Ω resistor in place, closing the switch sends about 155 mA through it and the LED burns out within seconds.

Click the resistor, open its settings with the gear icon and change the colour bands before you close the switch. With 470 Ω (yellow, violet, brown) the A meter reads about 15.8 mA and the LED glows without burning out. If it burns out, open the starter circuit again.

What's inside

  • 1× Battery
  • 1× Resistor (47 Ω)
  • 1× LED
  • 1× Switch
  • Measured with Voltmeter/Ammeter

Tags

About

By Samir Sabri
Saved November 20, 2026
33 views
Page: dcaclab.com/circuits/88046-circuit-challenge-protect-the-led

Embed this circuit

<iframe src="https://dcaclab.com/experiments/88046-circuit-challenge-protect-the-led/iframe" width="560" height="410" frameborder="0"></iframe>

Cite: Sabri, S. (2026). Circuit Challenge: Protect the LED. DCACLab. https://dcaclab.com/circuits/88046-circuit-challenge-protect-the-led

Related circuits